Pump stove additional lunfei liquid 12 v 24 lfbros | Автомобили и мотоциклы

Pump stove additional lunfei liquid 12 v 24 lfbros | Автомобили и мотоциклы

If the stove is cool air-you need to install an additional pump. The installation is made in series with the heater. Connection-parallel to the heater fan. Thus, as soon as the heater fan works-an additional pump will immediately work, providing the flow of antifreeze (tosol) through the heater.
The reliability of the pump is achieved by the fact that the pump lunfei does not have a oil seal (seal), and the moment of rotation on the shaft of the impeller is is

When you order, please choose:
Required voltage 12 or 24 in.
And the diameter of the pump pipes is 16 or 20mm.

Can be used with pre-start and Webasto type heaters as a circulating pump.
Specifications:

Dimensions overall-110x70x120mm

Connecting diameter of the pipes (the inner diameter of the hoses-16 li 20mm

Working mode-continuous

Operating temperature of liquid- -40 .... + 100 deg. Celsius

Work (nominal) voltage-12 or 24 in the current permanent

Power consumption-2,4...14,4 W (depending on the supply voltage and load)

Feed (flow rate) - 10 L/min or 600 L/H

Current consumption-12v: 0,2...1,2 A; 24v: 0,1...0,6 a

Pressure (lifting height of water or liquid at 1000 kg/CBM density) -2 m

Sound pressure level (noise) - =< 40 dB

Protection class-IP44

Possibility of feeding from the on-board network, battery, power supply

Application-pumping a car cooling system

Pump weight without Package (net) - 0,4 kg

Zirconia ceramic shaft

Electronic control with stability of rpm under load with Hall sensor control

Immersed in liquid rotor with radial magnet (brushless and oil-free design). Shaft oil seal-missing. The rotor is driven by a running magnetic field. The speed is controlled by the Hall sensor.

Possibility of arbitrary switching without reducing the service life (on/off of any duration with any pauses)

Soft rubber shock absorber with metallized hole (for attachment)

Red Wire "+", Black Wire "-", re-pole is not allowed

Impeller bearings-ceramics

Eliminate the use of contaminated pumps to avoid jamming the impeller of pumps.

Application:

Additional pump to increase the flow of the air to the regular heater/heater of the cabin

Replacement of standard pump of autonomous heater type Webasto/ebershpacher or other