Мойка высокого давления комплект для пескоструйной обработки мокрого

Мойка высокого давления комплект для пескоструйной обработки мокрого

Parcel Contents:  

1. Sand Blaster Head (with Top quality ceramic core), Max 180bar/ 2600psi

2. 18” / 46cm Water Spray Wand

3.10” / 25cm Sand Intake Wand

4. 10’ / 3m Siphon Hose

Application:

Using dry sillica sand, baking soda or washed and dried river sand for abrasive cleaning, effectively for removing rust, paint and stubborn dirt.

Specification:

Nozzle Orifice: #035

Nozzle Material: Brass,

Nozzle Cone Material: Ceramic

Max Pressure: 180 bar/ 2600 psi, Max Flow: 10.5 LPM / 2.8 GPM

Max Temperature: 60℃ / 140℉

How to Set Up:

1. Connect the sandblaster lance to pressure washer trigger gun or lance.

2. Insert sand probe into media (dry silica sand, baking soda or washed and dried river sand). Please make sure the sand is dry, or it will not work.

3. Turn on the pressure washer. Unlock the trigger gun, then water and sand will come out from sandblaster nozzle. Please make sure the suction inlet is above nozzle. If the suction inlet is underneath the sandblaster nozzle, the water will go into the hose of sand, wet the sand and then sand will not be sucked up.

4. After work, please dry the cleaned goods as soon as possible, otherwise they will rust again the next day.